Loading... Please wait...

Our Newsletter

Dixie Narco SP/T/E Model Inner Door Seal/Gasket For Narrow 72" Machines (276E)

  • Image 1
VT1663 or 801804030.01, 80181229
4.50 LBS
Usually ships within 24 hours
Calculated at checkout

Product Description

This is the inner door seal for most 72" tall, narrow Dixie Narco soda machines (276E and others), from the single price models, through the E model and HVV E model.  These gaskets will NOT work if you have a full-sized soda machine from those series, like a 501E; that is a different sized gasket.  Check the model number chart on this listing of known compatible models, or call us at 970-623-1272 to confirm this part will fit your machine if you are unsure.

If the gasket you have now sags along the bottom of your door, or if it is torn around screw holes, excessively dirty or sticky, or if you have problems with you evaporator icing up over time, try replacing this gasket!  A worn-out gasket will allow ambient air into your machine, and can cause long compressor run cycles, evaporator ice, or excessive drain water.

Warranty Information

No warranty.

Other Details

Compatible with:
Most Dixie Narco flat front and bubble front narrow 72" tall soda machines. Compatible models include the 276, 276E
Manufacturer part number:
801804030.01, 80181229

Find Similar Products by Tag

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Dixie Narco SP/T/E Model Inner Door Seal/Gasket For Narrow 72" Machines (276E) to your wish list.

You Recently Viewed...