Product Overview
The CT3 Vending Tester Pro from SEM is capable of testing all coin changers and bill acceptors on the North-American market. It supports many protocols, old or new, and is equipped with the SSPS Overload feature protecting the unit against shorted devices.
Furthermore, the CT3 offers 3 programmable selections enabling you to test your MDB equipment in real life situation and even more than one at a time.
*Note. To test any validator that is not MDB, you will need to get the External Bill Validator Module, or EBVM (part number VT1160), in order test your 110 volt and pulse validators. The EBVM plugs directly into the CT3 tester. The tester without the EBVM will test all coin changers. No extra module is needed for coin changers.
| Part number | A00885 |
| Protocols supported * | Single price |
| Logic/Micromech 12/15 pins 24VDC et 110VDC | |
| MDB Coin Level 2-3 | |
| MDB Bill Level 1 | |
| MDB Card Level 2 | |
| Pulse type with optional EBVM interface for following models : | |
| Ardac USA | |
| Ardac ABA | |
| Coinco BA30SA | |
| Coinco BA32SA | |
| Conlux/Maka NB/NB2/NBE (120 volts) | |
| Maka MKA/NBV | |
| Mars VFM Series | |
| Mars VN2500 | |
| Mars GL4/GL5 | |
| MEI Series AE | |
| Display | LCD Green 2 X 20 |
| Test modes | Manual, auto-test & simulation |
| Number of vend prices | Three programmable, on simulation mode only |
| Calibration mode | Yes, for some Micromech/Logic and MDB |
| Dimensions HxWxD | 7 1/8'' x 7'' x 9¼'' (181 x 177 x 232mm) |
| Power | 120 Vac 60 hertz |
| Shipping weight | 10lbs (4.5kg) |
Warranty Information
1 year parts and labor warranty.
