Product Overview
This version of the Evolution hopper made by PayComplete for American Changer change machines has a new universal front and rear load mounting design that eliminates the need to reorient parts on the hopper for front or rear load change machine configurations. This hopper now stays plugged in to the control board of your change machine at all times, including when you slide it off of its mounting plate. To unplug it, if necessary to remove it farther from the machine than the length of connection cord allows, it can be easily disconnected by hand by unplugging the harness from the hopper.
These hoppers will replace any ccTalk interface MK4, Green-Stripe, or Yellow Stripe hopper currently in any American Changer change machine.
These hoppers are available only in the ccTalk interface, which means they will not replace older parallel interface hoppers used in old change machines with mechanical counters or red display control boards. A ccTalk machine can be identified by the hopper harness plug connected to your control board. It is a short red plug, and is pictured in one of the listing pictures for this item.
You can call us (970-623-1272) to check if these hoppers will replace what you currently own before you purchase.
